Used for transfer and injection of low sulphur fluid, sour fluid, and fluid with aromatic content, gas transfer, jumping and flowline, etc.
•Standard: API Spec 17K / ISO 13628-10.
Inner Carcass: Stainless Steel Carcass
Internal Tube: Particular polymer engineering plastic as inner sealing tube
Inner rubber Layer: HNBR based inner sealing elastomer, which is good for fluid with H2S, oil resistance, corrosion resistance, high temperature resistance, gas permeation resistance.
Breaker Layer and external protection layers: High tension textile fabric
Major Reinforcement for withstanding pressure: High Strength Steel Cable
Fire shield layer: glass fiber cloth
Cover: Neoprene based rubber based cover, anti-flaming, wear resistance, oil resistance, ozone & ageing resistance, UV resistance, which is designed for critical marine environment.
•Fire resistance meet API Spec 16C at 704℃ (1300℉) x 30 minutes.
•Embedded electric heat trace cable is available as request for low temperature operating condition.
•External protection layer of hose can be equipped with stainless steel armor, stainless steel wire and polyethylene spiral sleeve, etc.
•Working temperature: Class II, -25℃ to +100℃ (-13℉ to +212℉)
•Max. Aromatic content: 30%
•Max. H2S content: up to 3000ppm at 60℃; Max. 1000ppm at 100℃
•Maximum continuous length: 70 meters
•Length tolerance: Length up to 6.4m, with tolerance 64mm; Length longer than ±6.4m, with tolerance ±1%;
•Measurement basis of Minimum Bending Radius (MBR) is center line of each hose.